<p>Comes with Basic Reusable Spool<br>Diameter: 1.75mm +/- 0.03mm<br>All AMS Series Compatible<br>0.2 mm Nozzle Not Compatible<br>Dry Out Before Use<br><br>Recommended Printing Settings<br>Drying Settings (Blast Drying Oven) - 55 °C，8 h<br>Printing and Keeping Container's Humidity - &lt; 20% RH (Sealed, with Desiccant)<br>Nozzle Temperature - 190 - 230 °C<br>Bed Temperature (with Glue) - 35 - 45 °C<br>Printing Speed - &lt; 300 mm/s<br><br>Physical Properties<br>Density - 1.24 g/cm³<br>Vicat Softening Temperature - 57 °C<br>Heat Deflection Temperature - 57 °C<br>Melting Temperature - 160 °C<br>Melt Index - 42.4 ± 3.5 g/10 min<br><br>Mechanical Properties<br>Tensile Strength - 36 ± 2 MPa<br>Breaking Elongation Rate - 15.2 ± 0.5 %<br>Bending Modulus - 2270 ± 60 MPa<br>Bending Strength - 73 ± 3 MPa<br>Impact Strength - 61.2 ± 2.8 kJ/m²</p> <p>Feels Like Real Wood<br>Matte Finish, Fine Texture<br>Integrates Perfectly with Other PLA.12 Months Local Manufacturer Warranty</p> <p>Store in dry cool place.</p> <p>China</p>